DO NOT use cleaning
pads with abrasive
surfaces as this may
scratch the material
DO NOT use cream
cleaners or bleach.
These substances are
abrasive
Regularly clean with mild
liquid detergent or soap
and water
INSTALLATION GUIDE
Note:
This product must be installed by a licensed plumber. This is a general installation guide - there are many factors involved that
can alter the installation method.
AU/NZ:
For installations within Australia and New Zealand, this product must be installed in
compliance with AS/NZS 3500.
UK:
For installations in the United Kingdom this product must be installed in compliance with the
Water Supply (Water Fittings) Regulations and Water Supply (Water Fittings) (Scotland) Byelaws.
Other:
For installations outside
these countries, this product must be installed in compliance with the standards in your respective country.
I
N
T
E
R
I
O
R
S
1
Assemble components as shown in the below graphic. Ensure
each parts is secured by tightening the appropriate fittings
with an allen key.
Diverter
Brass fitting
Brass fitting
Shower rail
Adjustable hand
shower holder
Fixing bracket
1/2 Inch fitting
Cover plate
Cover plate
2
1. Connect water outlet. Use appropriate thread sealant.
2. Mark and fix supplied fixing plate (you may have to remove
the fixing plate from the fixing bracket with an allen key).
3. Before attaching the gooseneck and showerhead run the
water through to clear shower rail of debris.
4. Connect shower hose, run water through hose to clear of
debris. Attach hand shower.
1.
2.
3.
4.
BOTTOM DIVERTER
