1
Check the desired height of vanity from floor.
2
3
Silicon top and sides of vanity if necessary
.
If correct height and position is suitable, level the
top of
the vanity & mark out desired position.
Drill holes through the back of vanity into structure
within wall.
Notes:
ensure adequate fixings are fixed at
maximum 450 centres into structure within wall.
ABI
takes no responsibility if vanity is not
fixed into wall structure.
Fixings and drill bit not included in vanity
purchase.
level
@ max 450mm centres
fixings into structure
GENERAL WALL HUNG VANITY INSTALLATION GUIDE
This installation guide is general and covers our wall hung vanity range, the vanity
illustrated may not be the same as your purchased vanity.
This product must be installed by a licensed tradesperson.This is a general installation guide
there are many factors that are involved that can alter the installation method.
Our vanities do not come with pre-cut holes to stone or timber for your bench mixers and
basins. These are to be cut by the purchaser at their discretion.
