ABI Attachments ARTRTL66, Operator'S Manual

Page: 14 / 48

(see #4, fig. 5) ; open the telescopic shield and bolt the outer cover to the retaining
plate on the sliding frame (see #1, fig. 6) ; ensure the telescopic shielding when open
does not touch the hexagonal shaft and is parallel as possible; slide the frame back
two or three times from completely open to completely closed to be sure it opens
and closes without difficulty. Note: Lightly greasing the hexagonal drive shaft helps
to side-shift the tiller.
9. Grease right rotor support bearing (see #4 & 5, fig. 3) .
O
PERATION
14 ABI A
TTACHMENTS
C
OMMAND
T
ILLER
O
PERATOR
’
S
M
ANUAL
Fig. 6
1. shield bolts
2. sliding frame support
3. U bolt
4. telescopic shield
5. right shield
6. gearbox holding bolt
1
1
2
3
6
4
5
Fig. 7
1. rear shield
2. adjustment chain
3. 'U' bolt
4. chain hitch
5. sliding frame
6. gearbox
1
2
3
4
5
6