Apply thread tap or other approved sealant to the nipple.
2.
Fit the wall plate into the shower arm head according to the diagram.
1.
Installation Guide
Fit the shower arm onto the nipple and ensuring it is tight, flush with the wall,
and that the arm outlet is vertical.
The shower arm can be adjusted by swiveling into the desired position.
Note
: This shower may not be suitable for use with gravity fed water
heaters, low and unequal pressure supply networks, instantaneous water
heaters, tempering valves and/or thermostatic mixing valves.
In accordance with AS/NZS 3718
The following pressure range should be complied with:
·Minimum working pressure 150Kpa
·Maximum working pressure 750Kpa
3.
4.
ALL ABEY SHOWERS MUST BE INSTALLED IN ACCORDANCE WITH
AS/NZS3500 SERIES.
ALL ABEY SHOWERS ARE CERTIFIED IN ACCORDANCE WITH
AS/NZS 3718:2005, LICENCE NUMBER WMK26399
