Abet Technologies, Inc. DLD-100 Series Digital Light Detectors
www.abet-technologies.com M-LS Rev B
2
Microsoft .NET Framework 1.1, if missing, needs to be installed after a download from the Microsoft
site.
2
Installation
1.
Connect your DLD to the USB 2.0 hub
2.
Connect the power supply to the DLD and plug the power supply into the mains
3.
Windows will recognize the new hardware and request the location of the required drivers. Insert the
installation and point to that drive to complete the first installation steps. Follow system instructions.
At the end of this step the following should have occurred:
a.
AbetGeneric.inf installation file has been compiled by the system and placed into
Windows/INF folder as OEMxx.inf and OEMxx.pnf files
b.
Abet.sys has been copied into Windows/System32/drivers/ folder
c.
DLD_AX.ocx has been copied into Windows/System32 and registered
You can confirm successful installation by opening the Control Panel, System, Device Manager:
