User Manual - ABES Bicycle-Stand 480
Installation and maintenance instructions
_________________________________________________________________________________________________________________
Page 5
A
BES S.À R.L.
48, RUE GABRIEL LIPPMANN
|
L
-6947 NIEDERANVEN
|
FON
+352 28 67 65 01
|
FAX
+352 28 67 65 20
|
WWW.ABES-ONLINE.COM
Notes
Weather protection
The bicycle stand is designed for outdoor use. No particular protection measures are re-
quired.
Concerning the perceptibility of a vacant bicycle rack
system
Visually impaired or blind persons can identify the bicycle stand system by touching it
with a cane. The front wheel rack functions as ground level crossbar (tactile bar). There
is no (tripping) hazard even though its lower edge is not set exactly 150 mm above
ground. Also, passers-by and users do not risk to hit their head as there is no component
at a height between 1.350 and 2.000 mm to pose any danger.
Stability and equilibrium
The bicycle stand offers secure positioning if assembled and mounted as indicated by the
guidelines in chapters
Planning sketch
,
Technical data
and
Assembly
.
The construction’s components have been given sufficiently large dimensions to guaran-
tee adequate theft prevention. Their preservation is subject to the condition of correct
use (see chapter
Handling
) and appropriate care (see chapter
Cleaning
). For the replace-
ment of damaged parts refer to chapter
Repairs
.
Cleaning
In spring and in autumn, the construction must be cleaned from major dirt, deposits, and
other impurities with water or a damp cloth. The use of corrosive or abrasive cleaners
can damage the surface permanently. Only cleaners specifically suited for stainless steel
may be used. The impact of dissolved dirt and cleaning agents on the environment
should also be considered.