AirCleaner
•
User Guide
77
4. Operations
Control Panel Menu Item Descriptions
This parameter has three possible settings:
•
= Defocus
When the VIDEO Panic Button is pressed by either
operator (Screener 1 or Screener 2) the visual
violation is masked by defocusing the live image. The
amount of defocus is determined by the
Defocus
Level
parameter.
•
= Luma Matte
When the VIDEO Panic Button is pressed by either
operator (Screener 1 or Screener 2) the visual
violation is masked by switching to a flat-screen
luminance matte image. The luminance value of matte
image is determined by the
Luma Matte Level
parameter.
•
= AUX IN
When the VIDEO Panic Button is pressed by either
operator (Screener 1 or Screener 2) the visual
violation is masked by switching to the
AUX IN
video.
(The following parameter appears only when:
On Video Trigger = Defocus
)
This parameter has the following adjustable range:
•
= 0
Minimum value.
•
= 100
Maximum value.
The
Defocus Level
parameter is available in the Main Menu listing only when
the
On Video Trigger
parameter is set to
Defocus
, and determines the
amount of defocusing applied to the live image when the VIDEO Panic Button is
pressed and held down.
To properly adjust the
Defocus Level
parameter:
1. Feed a live video input into the
PGM IN
of AirCleaner.
2. Ensure the
On Video Trigger
parameter is set to
= Defocus
.
3. While viewing
PGM OUT
from AirCleaner, HOLD DOWN the VIDEO Panic
Button. After the “Total Program Delay” time has expired, the
PGM OUT
will
display the live defocused image; the amount of defocus will then change with
the rotation of the
SET
knob.
4. TURN the
SET
knob on the front of AirCleaner to the defocus value desired.
A change made to this parameter is automatically saved in the active online memory.
On Video Trigger
= Defocus
NOTE
The visual content is masked for the total amount of time the
VIDEO Panic Button is held down (plus any additional Reaction
Time). In two-screener mode, the visual content is masked for the
amount of time BOTH the VIDEO Panic Buttons are held down.
Refer also to
for more information.
Defocus Level
= 50
Summary of Contents for AirCleaner
