AirCleaner
•
User Guide
67
4. Operations
Programming AirCleaner
knob will adjust the duration of the program delay.
Fast Adjust for Wide-Range Parameter Value Changes
For some parameters, the range of adjustment can cover a very large scale. For
example, the
H OUT Timing
parameter in the Options Menu has an adjustment
range from 0 to 2199. Since there are 32 detent clicks on the rotary knobs, and each
“click” of the knob changes the parameter by a value of one, it would take over 68
complete rotations of the knob to get from one end of the range to the other (for
this parameter). This can take quite a long time.
To help make wide-range parameter adjustments much faster, the
SELECT
knob
can be used to modify the
SET
knob adjustment behavior.
To make a fast adjustment of any active menu parameter:
1. PUSH and HOLD the
SELECT
knob.
2. TURN the
SET
knob (while holding down the
SELECT
knob).
The value for the active parameter will now adjust faster than when the
SET
knob is
turned by itself.
Integrated Push-Buttons in Rotary Knobs
The integrated push-button within the
SELECT
and
SET
knobs are used to confirm
changes made to parameters in the Options Menu, as well as confirming (or
canceling) system parameter changes, as instructed in the LCD. For example, the
following display is asking the user to confirm or cancel to changes made to the menu
parameters:
...in this situation, PUSH the left-hand
SELECT
knob (
< EXIT
) to “Cancel” the
changes, or PUSH the right-hand
SET
knob (
OK >
) to confirm the changes.
WARNING
DO NOT ADJUST PARAMETERS WHILE LIVE “ON-AIR”
Changes made to all parameters in the Main Menu will take effect
as the parameter is being changed. Depending on the parameter
being changed, this could disrupt the LIVE audio/video outputs!
Changes made to all parameters in the Options Menu require:
•
TURN the
SELECT
knob to reveal the “Save Changes?” item.
•
PUSH the
SET
knob to “OK” the save operation.
Saving any change to any parameter in the Options Menu could
severely disrupt the audio/video outputs from AirCleaner; these
changes should NEVER be saved while using AirCleaner live on
the air!
Save Changes?
<
_
EXIT
______
OK
_
>
Summary of Contents for AirCleaner
