Abekas AirCleaner, User Manual

Page: 14 / 106

4 AirCleaner • User Guide
1. Introduction
System Overview
supplies share the power load. In the event one of the redundant power supplies
fails, the remaining operational power supply will automatically take over
complete power load for AirCleaner.
Panic Button Control Panel
The Panic Button Control Panel is a simple two-button user interface (one button
for Video, the other for Audio) that sits on a desktop and is connected to the
AirCleaner main chassis via a 9-pin cable.
Figure 1-1. Panic Button Control Panel
The Panic Button Control Panel is used to trigger the video and/or audio mask in
the event of a visual or aural offense. Pressing the specific button (
AUDIO
or
VIDEO
) will tell AirCleaner to mask the content according to how the AirCleaner
was previously programmed via the main chassis user interface. The masking will
continue for the duration the button is held down.
The Panic Button Control Panel connects to the system mainframe via simple GPI
connections. Most facilities will want to design their own Panic Button Control
Panel to fit their workflow; however Abekas provides this option for those
customers who don’t wish to build their own control panels. The Panic Button
Control Panel ships with a 33-foot shielded cable for connection to the GPI
connector on the AirCleaner main chassis.
Panic Button “Y” Cable
In some instances, AirCleaner can be operated in a “two screener mode” which
requires a second Panic Button Control Panel. In order to connect two Panic Button
Control Panels to the AirCleaner main chassis, this customized “Y” cable is
required. This “Y” cable is connected to the rear of the AirCleaner chassis, and
then the control cables for each of the two Panic Button Control Panels are
connected to the “Y” cable.
NOTE
All options ordered at time of sale will be installed and tested with
the AirCleaner chassis. All options ordered after time of sale will
ship with detailed installation instructions. If there are any
questions regarding installation of these options, please contact
Abekas technical support.
NOTE
Pin-outs for the Panic Button “Y” cable are provided in
Chapter 2
.
These are simple GPI connections, easily built at the customer’s
site, thus allowing for more specific and custom installations.