4
V10
Car Recorder Manual
Hardware Installation Guideline
Installation
1.
Connect the device with the bracket by inserting the screw hole on top of
your device in the screw of the bracket; turn the screw knob in clockwise
direction until it firm.
2.
Place your Driving Recorder in the proper
position, stick the suction plate to the
windshield, and press the plate button to
secure the stand
.
3.
After install the bracket, release the
adjust knob below the suction plate to
adjust the shooting angle.
4.
After finishing adjust shooting angle, turn
the adjust knob until it firm to lock the
position of the device.
5.
Insert Micro SD card in to Micro SD card
socket.
6.
Insert car charger it to cigar socket and
connect to V10
.
Hardware Installation Guideline
E
nglis
h
Summary of Contents for V10
Page 1: ......
