9
C3/C3G Full HD Car Camcorder User Manual –English–
3.
Make sure the bracket has been firmly installed.
4.
To adjust device vertical position,
loosen the top knob. To swivel the
device horizontally(360
°)
, unscrew
the bottom knob.
5.
Screw back tightly to secure recording angle.
6.
To disconnect the suction cup and the windshield, pull down the clamp. Make
sure the device is securely in your hand in advance.
7.
To disconnect the bracket and the
device, press on the part on the
bracket base that sticks out and push
outward while pulling the device
inward as shown in the illustration.
2.1.3
Connect to Power
1. Connect the cigarette car charger cable to the micro USB slot on the device.
2. Connect the other side of the cigarette car charger cable to car.
＊
Red LED lights on the device indicates device is recording; GREEN lights indicates
device on stand-by mode
.
2.2
Device ON/OFF
1.
Auto ON/OFF: When the car charger, the car and the device are correctly
connected, device will be on automatically when the engine starts. When
