2 - Triple Crown Modular WaterFed® Pole Operation and Maintenance Manual
2. Initial Setup
3. Replacement Parts
1. Separate all sections. Some may be stored inside of
each other.
2. Screw double angle adapter onto the end of your
number one section.
3. Screw brush onto the euro threaded side of your
double angle adapter.
4. Assemble sections in order (section 1 to section 2,
section 2 to section 3, etc.). Use light coat of PTFE
spray on each connection before every use.
5. Insert End Plug into the last section you are using to
protect the pole end.
6. Insert pole tubing into desired fitting on your brush.
We suggest that you run your tubing externally.
Brush
Double Angle Adaptor
Tip
Collar 1
Section 1
Sections 2 - 6
Section 7
Section 7
End Plug
Sections get larger and
must be assembled in order.
Section 7 is the final section.
Add as many as you need.
Single Jetted Brush
- WF50465-PJ2
Double Jetted Brush
- WF50465-FJ1
Double Angle Adaptor
- TCSWITCH
Tip
- 6000-G-1Tip
#1 Section Collar -
6000-G-RC1
Bag -
5000-BAG
End Plug -
5000-PLUG
PTFE Can -
5000-PTFE
Section -
5000-[x]-RS
Shut-Off Valve -
WF601311
Tubing -
WF600600-[x]
Carbon Gooseneck
- 6000-G-GN[x]-CF
Optional Accessories
You can watch the video at:
www.abcWindowSupply.com/ModularGuide
