3x8mm Button
3x8mm Button
Head Screw
Head Screw
3x8mm Button
3x8mm Button
Head Screw
Head Screw
3x30mm Set Screw
3x30mm Set Screw
3x30mm Set Screw
3x30mm Set Screw
1.5mm Hex Wrench
1.5mm Hex Wrench
Change direction
Change direction
for
for
adjusting angle of the
adjusting angle of the
servo horn.
servo horn.
Use this part that
Use this part that
fit for each servo.
fit for each servo.
Use the screw that
comes with Servo.
Servo Rod : 49mm
Servo Rod : 49mm
Ball End Long
Ball End Long
Ball End Long
Ball End Long
Keep symmetrical,
Keep symmetrical,
Right and Left.
Right and Left.
3x30mm Set Screw
3x30mm Set Screw
12
12
When the Power is on, the Servo
Horn should be in the neutral
position as shown in the picture.
90
Change direction
Change direction
for adjusting
for adjusting
angle of the servo horn.
angle of the servo horn.
3X6mm
3X6mm
Hex Cap Screw
Hex Cap Screw
3X6mm
3X6mm
Hex Cap Screw
Hex Cap Screw
3x3mm Set Screw
3x3mm Set Screw
3x3mm Set Screw
3x3mm Set Screw
Deck Pillar
Deck Pillar
540 Size Motor
540 Size Motor
Pinion Gear
Pinion Gear
1.5mm Hex Wrench
1.5mm Hex Wrench
SERVO SAVER
SERVO SAVER
4mm Ball Stud
4mm Ball Stud
Servo Mount
Servo Mount
Servo Saver
Servo Saver
Steering Servo
Steering Servo
3mm Washer
3mm Washer
3mm Washer
3mm Washer
4mm Ball Stud
4mm Ball Stud
4mm Ball Stud
4mm Ball Stud
Futaba
Futaba
TAMIYA
TAMIYA
Airtronics
Airtronics
KO
KO
JR
JR
Mini-Servo
Mini-Servo
INSTALLATION SERVO AND MOTOR
INSTALLATION SERVO AND MOTOR
3x10mm Flat
3x10mm Flat
Head Screw
Head Screw
3x10mm Flat
3x10mm Flat
Head Screw
Head Screw
Adjust the position of the pinion
gear to put the centers of two
gears together. Then fix it with a
set screw.
3X6mm
3X6mm
Hex Cap Screw
Hex Cap Screw
Copy Paper
Copy Paper
To get a perfect gear mesh, place a
piece of paper between the gears
and tighten the motor mount
screws. Adjust motor position for
smooth gear mesh.
6
