4) Insert the pump into the Pump Pocket:
a. Place the pump into the Pump Pocket so that the screen
is on the bottom and facing out (see Figure E).
b. Using the Pull Tab, confirm that both the display and the keypad are
visible through the Clear Plastic Window.
c. Route the tubing to exit through the Gray Zipper Opening on the side
of the Pump Pocket. Make sure that the tubing is not kinked.
d. Zip the Pump Pocket shut.
5) Interact with the pump (when needed):
a. You can access the pump’s keypad through the Clear Plastic Window.
b. Use the Pull Tab to view or cover the Clear Plastic Window (see Figure
F).
Figure E
Figure F
