![background image](http://html1.mh-extra.com/html/abbott/merlin-2-pcs/merlin-2-pcs_user-manual_3352860014.webp)
10
2.
Select the Interrogate Monitors button.
3.
The programmer will look for advertising pulses from the Confirm Rx™ Insertable Cardiac
Monitor.
Merlin™ PSA Model EX3100 Setup
Connect the Merlin™ PSA Model EX3100 into the PSA port on the Merlin 2 PCS
For more information on the Merlin PSA Model EX3100, including connection of the patient
cables and patient-cable adapters, refer to the on-screen help on the Merlin 2 PCS and to the
Merlin PSA user's manual.
Figure 7. Merlin™ PSA Model EX3100
1.
Functional Status LEDs
2.
Pace and Sense LEDs
3.
Receptacle for patient cable or patient-cable adapter
4.
Connector to Merlin 2 PCS
RF Communication Setup
Some St. Jude Medical implantable devices can communicate with the Merlin™ 2 PCS via radio
frequency (RF), which allows for a greater distance between the device and the Merlin 2 PCS. To
establish RF communication, follow the instructions below.
1.
Connect the Merlin™ Antenna to the RF Telemetry port on the back of the Merlin 2 PCS
(see figure below).
NOTE: Connect the Merlin Antenna only to the RF Telemetry port on the back of the
programmer. Do not connect the Merlin Antenna to any other ports.
Summary of Contents for Merlin 2 PCS
