38
Setting the Alarm
1. With the alarm number blinking, press the “
c
”
button until the correct alarm number blinks.
You can review the current alarm setting.
Note:
Pressing “
m
” when 0 is blinking, moves
you to the next meter setup screen:
“Setting the Sound.”
2. Press the “
m
” button to move to the hour setting.
3. With the hour blinking, press the “
c
” button
until the correct hour appears.
4. Press the “
m
” button to move to the minute setting.
5. With the minute blinking, press the “
c
” button
until the correct minute appears.
6. Press the “
m
” button to move to the alarm volume
setting. Default setting is off.
7. With one of the bell icons appearing, press the
“
c
” button until the desired alarm volume appears.
8. Press the “
m
” button to return to the main alarm
setup screen.
Repeat steps 1 through 8 (as needed) to set the
other alarms. (You can set up to four alarms.)
An alarm is set if the sound level is set to low or high. This will show
in set-up mode with a bell (alarm) icon displayed. An alarm is off if the
alarm volume is off. This will show in set-up mode with a bell (alarm)
icon with a slash/stroke through it. Any or all of the four alarms (alarm
1 through alarm 4) can be set. An alarm will never sound during a test.
Move to next Set
screen – Sound
Select alarm
Select hour
Select minute
Select alarm volume