Abbott Eterna 32400, Clinician Manual

Page: 16 / 28

The generator has the following operating parameters.
Table 4. Operating parameters for the generator
Parameter Tonic Range Tonic Steps Burst Range* Burst Steps*
Pulse width 20–1000 µs 10 µs
(20–500 µs range)
50 µs
(500–1000 µs range)
50–1000 µs 50 µs
Frequency 2–200 Hz 2 Hz — —
200–500 Hz 10 Hz — —
500–1200 Hz 20 Hz — —
Burst frequency — — 10–60 Hz 10 Hz
Intra-burst rate — — 250–500 Hz 10 Hz
500–1000 Hz 20 Hz
Amplitude 0–25.5 mA 0.1–1.0 mA
0–12.75 mA 0.05–0.50 mA
0–12.75 mA 0.05–0.50 mA
NOTE: Columns with * represent operating parameters for BurstDR™ stimulation programs on generators
capable of BurstDR stimulation mode.
NOTE: For each tonic program, you have the option to select the amplitude range. For information on
setting the amplitude range, see the clinician's programming manual for this system.
NOTE: The number of stim sets in use for a tonic program governs the maximum frequency (1200/
number of stim sets).
NOTE: The maximum current depends on the impedance, frequency, and pulse width settings.
Adapters and Extensions for Compatibility with Non-Abbott Leads
The Eterna™ implantable pulse generator is compatible with select Medtronic leads and extensions.
However, a compatible adapter or extension must be used to connect the Eterna™ implantable pulse
generator to Medtronic leads. Compatible adapter and extension models are listed in the following table.
Refer to the clinician manuals of the A127™ extension and the 8 ‑ channel adapter for the list of compatible
Medtronic leads and extensions.
Table 5. Compatible Abbott Adapters
Device Model
A127™ Extension
2341, 2342, 2343, 2346
8
‑
Channel Adapter 2311, 2316
WARNING: Always use a compatible adapter to connect the Eterna™ implantable pulse generator to
compatible Medtronic leads and extensions. Do not insert a Medtronic lead or extension directly into
the Eterna generator header as this may damage the header.
12