CELL-DYN
®
3200 System Operator’s Manual
13-7
9140181H—October 2001
Section 13
Sample Loader
Figure 13.3 Tube Labeling Requirements
Rack Labels
Every rack and tube position is identified by a bar code label. (See Figure 13.4.)
Bar code labels on tube racks are essential for proper Sample Loader operation.
The rack label must be placed on each rack ahead of tube position 1. This label
serves to identify the rack and tube position 1. The rack bar code label is read when
the tube in the first position is moved from Mixing Station #2 to the Aspiration
Station. Subsequent bar code labels on the rack identify tube positions 2 through
10.