manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 202

5-50

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Operating Instructions

Set Up Instructions

Section 5

Figure 5.23 Customize Printout Header Screen for the Graphics Report

Customize Header

The

[CUSTOMIZE HEADER]

key is used to customize the header for the graphics 

report. (See Figure 5.23.) Any report printed in a graphics format will be printed 
with this header. The following soft key labels are displayed when the

[CUSTOMIZE 

HEADER]

key is pressed:

RESTORE HEADER
BLANK HEADER
CUSTOMIZE DISPLAY
CUSTOMIZE PRINTOUT
SET UP

Restore Header

The 

[RESTORE HEADER]

 key is used to restore the header to the previous entry. 

This key is only functional immediately after a new header has been entered. Once 
a new header is entered and the 

CUSTOMIZE PRINTOUT HEADER

 

screen has been 

exited, the previous header is removed from the memory.

Blank Header

The

[BLANK HEADER]

 key is used to erase the current header.

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands