CELL-DYN
®
3200 System Operator’s Manual
5-45
9140181H—October 2001
Section 5
Operating Instructions
Figure 5.21 Units Selection Screen
Units Selection Menu
The
[UNITS SELECTION]
key selects the report units for the indicated parameters.
Units may be selected for each parameter individually or a set of units may be
selected by pressing the appropriate soft key. (See Figure 5.21.) The following soft
key labels are displayed when the
[UNITS SELECTION]
key is pressed:
USA UNITS
SI UNITS
SI MOD UNITS
SET1 UNITS
SET2 UNITS
SELECT UNITS
RETURN
The units selected by each of the soft keys are shown on the screen display in
Figure 5.21. The following table demonstrates how values are reported for the
same sample under each “units” category.
