CELL-DYN
®
3200 System Operator’s Manual
5-41
9140181H—October 2001
Section 5
Operating Instructions
Figure 5.19 Bar Code Set Up Screen
Bar Code Set Up
The
[BAR CODE SET UP]
key is used to select the type of bar code to be read and to
enable or disable the check digit option for the selected bar code. (See Figure 5.19.)
NOTE:
For more information about check digits and bar codes, refer to Appendix
A, Bar Codes.
To Set Up Bar Code
1. From the
OPERATION SET UP MENU
screen, press
[BAR CODE SET UP]
to
display the
BAR CODE SET UP
screen.
2. Type the number for the type of bar code that will be used:
1 — Code 39
2 — Interleaved 2 of 5
3 — CODABAR
4 — Code 128
Press the Enter key on the keyboard to save the entry and advance the cursor
to the Bar Code Check Digit field.
3. Press
[TOGGLE ON/OFF]
to enable or disable the check digit.
NOTE:
The
[TOGGLE ON/OFF]
key is displayed only when the cursor is
positioned next to
BAR CODE CHECK DIGIT
.
4. Press
[SET UP]
to return to the
OPERATION SET UP MENU
.
