14
.
4.1 Labeling of Inputs and Setting Level Offset
With the AM-777, in one process, it is possible to label each of the inputs with a corresponding
source and to set the respective level offset. This function is recommended only after ALL
desired sources have been connected to the AM-777.
Setup
Labeling
Input X
Setting Level
Offset
4.1.1 Labeling Input X
•
Press the
Setup
key on the remote
•
Uses the
/Volume-
to scroll through the names
•
Press the
OK
key on the remote to store the new name
4.1.2 Setting Level Offset
•
Level Offset
is flashing on the 1
st
line of the display
•
Use the
/Volume-
to increase/decrease the offset,
the volume will also change in realtime
•
The range of offset available is from
-18dB
to
+12dB
•
Press the
OK
key on the remote to store the new offset
4.1.3 Setting Fixed Input Level for Bypass Mode
•
Press the
button untill the display reads +12dB, press
again.
•
Press the
OK
button to enter the (Volume Control)
Bypass
mode.
Section 4 - Menu Setting
