Abbey Machinery AP Series Maintenance, Operating Instructions And Spare Parts List Download Page 18

 

18 

 

Repairs and Alterations 

Any products accepted for repair or alterations by the Company shall be held by the Company and repaired and 
altered by it entirely at Customer’s own risk. 

Force Majeure 

If circumstances occur which could not have been foreseen at the time the contract was concluded and which are 
beyond the control of the company and directly or indirectly prevent, hinder or make more  difficult the full or 
partial  performance  of  the  contract,  such  circumstances  being,  inter  alia  war,  threat  of  war,  civil  war,  natural 
disasters, riots, strikes, lockouts, fire, breakdowns in the Company’s factory, delayed or incorrect deliveries by 
the Company’s suppliers, government measures, blockages, the Company shall have the right without incurring 
further  liability  either  to  suspend  performance  of  the  contract  wholly  or  in  any  part  or  to  treat  the  contract  as 
cancelled  and  thereupon  all  amounts  due  to  the  company  by  the  purchaser  by  virtue  of  the  contract  become 
immediately  payable  but  without  prejudice  to  the  right  of  the  Company  to  claim  full  compensation  including 
compensation for loss of profit. The company shall have similar rights in relation to the contract in the event of 
the  purchaser  committing  an  act  of  bankruptcy,  suspending  payment  of  its  debts.,  entering  into  an  agreement 
with  its  creditors,  closing  its  business  or  in  the  case  of  a  limited  company  having  a  Receiver  or  Liquidator 
appointed over it or its assets (Liquidation for the purpose of restructuring excepted). 

Prices and Terms of Payment 

 

All prices are subject to alteration without notice and prices charged for goods and services are those 
ruling on the date of dispatch. This clause also applies to backorders. All prices are exclusive of V.A.T. 
and the same, together with carriage when charged, shall be borne by the Purchaser. 

 

The  Company  must  be  paid  in  full  without  deduction  in  respect  of  alleged  or  counterclaims  in 
accordance with the terms specified by the company from time to time and if no date for payment has 
been specified, by the last day of the month following month of invoice. 

 

If  part  only  of  an  order  shall  be  supplied,  the  terms  of  payment  shall  apply  to  the  goods  actually 
delivered, notwithstanding the shortfall. 

Damage in Transit and Shortages 

On delivery, the goods must be checked against the delivery note which  shall be signed by or on behalf of the 
purchaser.  Such  signature  is  an  acknowledgement  that  the  goods  have  been  received  in  good  condition  and 
order. The Company  will accept no responsibility for damage in transit or shortages unless same are noted on 
the Delivery Note, before signature. In any event all claims must be received by the Company within 7 (seven) 
days of the receipt of the Goods by the Purchaser. 

Risks and Reservation Title 

 

No property in any of the  goods the  subject  matter of this Contract  shall pass the Purchaser  until the 
invoice covering same has been paid in full. 

 

The goods shall be at the Purchaser’s risk from the date of delivery until they are paid for in full and 
during this same time the purchaser shall store the Goods so as clearly to show them to be the property 
of the company. 

 

The personnel of the Company its servants or agents will be allowed free access to the Goods and place 
of  storage  at  all  reasonable  times  with  the  intention  that  such  personnel  may  remove  such  Goods  in 
exercise  of  any  provisions  in  this  clause.  Any  expense  incurred  in  so  doing  shall  be  borne  by  the 
Purchaser. 

V 30.03.15 JD 

 

Summary of Contents for AP Series





















Reviews: