www.ABBALightingUSA.com
To prepare the landscape wire for connection, follow these
simple steps:
Strip 1/2 inch of insulation from both wires.
Twist the exposed ends of the wires together tightly.
To connect the wires to the transformer, please carefully follow
these step-by-step instructions:
Carefully position the wires underneath each terminal plate and proceed to
secure them firmly by tightening the screws.
After connecting the wires to the terminal blocks, it is vital to verify
that they are securely and properly positioned. Follow these steps to
ensure a secure connection and complete the installation:
1.Carefully inspect the terminal blocks to confirm that the wires are fully inserted
and tightly secured within their respective terminals. Make sure there are no loose
or exposed wires.
2.Gently tug on each wire to ensure it is firmly held in place and does not come
loose. This step helps verify the stability of the connections.
By following these instructions, you will guarantee that the wires are securely
placed within the terminal blocks, minimizing the risk of disconnections or
electrical issues. Additionally, closing the casing properly provides protection to
the internal components of the transformer.
