Do not instal within 10 feet of a pool, spa or fountain
CAUTION:
fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
fixture(s) should be used
"ONLY"
with
low voltage landscape power units
that do not exceed 25A, 15V.
The main cable from power units
should be buried for less than 6 inches
under the ground level.
1. Please ensure the light cable wires
input are 12v ac/dc.
2. Turn off power before installation.
3. Attach the fixture(s) wires to the
main cable connector suitable for
direct burial. Use waterproof wire
nuts.
WN12
(Sold separately).
4. Put the spike into the ground. Try to
make firm vertical mounting.
5. Adjust the light angle.
6. Turn on power.
WN12
(Sold separately)
Main Line
Connect the wires using
www.ABBALightingUSA.com
