ABB ZMT Zirconia Manual Download Page 8

Page: 8 / 10

AN-84

SS ZMT

Overall Dimensions ZGP2 Probe.

SPECIFICATION

Temperature Range:

600° to 1000°C (1112° to 1832°F) NiCr/NiAl thermocouple
BS4937 Pt. 4 Type K.
600° to 1250°C (1112° to 2282°F)
Pt/Pt 13% Rh thermocouple BS4937 Pt. 2 Type R

Measuring Range

Response Rate:

Estimated to be 0.1 seconds.

Reference Gas:

Clean oil-free air. Flow rate 500 to
1000ml/min (0.22gal/min).

Protective Sheath:

Aluminous porcelain or Incoloy 800.

Mounting:

Vertical or horizontal, 42mm (1.65in) hole size.

Connecting Cables:

2-core copper, overall screened for probe output. 2-core
compensating cable to suit thermocouple fitted (NiCr/NiAl
or Pt/Pt 13% Rh).

Thermocouple:

Pt/Pt 13% Rh – Pt. 2 BS4937 Type R.
NiCr/NiAl – Pt. 4 BS4937 Type K.

Insertion Length:

556mm (21.9in) or 953mm (37.5in).

Weight:

2.5kg (5.5lb) nett. [600mm (24in) probe]
2.8kg (6.16lb) nett. [1000mm (39in) probe].

Code Digits

Insertion

Length

Thermocouple

Sheath

Mounting

Connector Head

1,2,3,4 -

ZGP2 Zirconia
Oxygen Probe

600mm
(24in)

1000mm
(39in)

Special

Pt/Pt13% Rh BS4937 Part 2 Type R

NiCr/NiAl BS4937 Part 4 Type K

Special

Aluminous Porcelain
(Standard)

Incoloy 800

Special

Flange 0

Standard

Twin Gland
Type C95 Head

Identification Table for ZGP2

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182E-MAIL: [email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL: [email protected]

Summary of Contents for ZMT Zirconia











Search results

Summary of Contents for ZMT Zirconia

Reviews:

Related manuals for ZMT Zirconia

Brands by name

Popular brands

ABB ZMT Zirconia, Manual

Search results

Summary of Contents for ZMT Zirconia

Reviews:

Related manuals for ZMT Zirconia

Brands by name

Popular brands