manualshive.com logo in svg

ABB Welcome IP H82364 02 Series, Product Manual, Page: 94 / 135

Share
Download
ABB Welcome IP H82364 02 Series Product Manual Download Page 94

Operation

Product manual 2TMD041900D0001

│

94

9

Operation

9.1

DES page

No.

Function

1

Screen name

2

Surveillance

Click this icon to initialize surveillance. Please see the "Surveillance" chapter for more details.

3

Release the default lock

This icon is disabled by default. Please see the "Set the address of default lock" chapter for
more details.

4

Program button

The address of default lock must be set before this function can be used. Please see the " Set
the address of default lock" chapter and the "Program button settings" chapter for more details.

5

Mute

Click this icon to mute the ringtone on this indoor station.
Press this icon and hold for 3 s to mute the ringtone of all the devices in the same apartment.
Please see the "Mute" chapter for more details.

6

SOS

In standby mode, press this icon and hold for 1 s to send an SOS call to the guard unit and
management software.

Summary of Contents for Welcome IP H82364 02 Series








































































































































Reviews:

No comments