ABB VSN900, Commissioning Manual

Page: 27 / 36

• ETH1 configuration refers to the Ethernet gateway port of the inverter network. The
preferred IP setting is STATIC.
• If IP setting is
• STATIC - allows to assign a fixed IP address. When data for assigning the IP
static address appears, complete all additional fields except the secondary DNS
server.
• DHCP - router automatically assigns a dynamic IP address whenever the
network is connected.
6. If configuration is successful, the connectivity check status shows green. Click Close .
If configuration is not successful, recheck the connections to the gateway and repeat
the steps for
Configuring the gateway (page 22) .
At any point-of-time to check the connectivity status, go to Service Tools →
Connectivity Check .
Start-up 27
12