Operation Manual / TPS48-D/E.. - TPS61-D/E..
8 Disassembly and assembly / 8.3 Disassembling and assembling tur-
bocharger
© Copyright 2020 . All rights reserved.
HZTL2410_EN
Rev.F
March 2020
Fitting diffuser
u
Fasten diffuser (79000) and O-ring (42012) using screw (42008).
u
Check lifting gear and fasten to bearing casing (42001).
u
Unscrew the cartridge group and lift it out of the service support
(90012).
u
Apply high-temperature grease to the centering points and screw
threads.
u
Remove temporary covers from oil connections.
CAUTION
Don't damage or shift gasket rings (A) in the mounting support when
fitting the cartridge group. The gasket rings (A) are supplied by the en-
gine builder.
NOTICE
If two turbochargers are mounted on an engine, one with a left-hand
and one with a right-hand oil inlet, a pin can be fitted in the bracket as a
precaution against incorrect positioning. This pin (B) locates in a cor-
respponing groove in the foot of the bearing casing.
Page
91
/
111
All manuals and user guides at all-guides.com
