Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9
Dismantling and fitting
Page 74 / 99
© Copyright 2016 ABB. All rights reserved.
HZTL4037_EN
Revision A
August 2016
9.11
Fitting the diffuser
Figure 30: Fitting the diffuser
Part number
TPS44
TPS48
TPS52
72041
M5
5 Nm
M5
5 Nm
M6
10 Nm
Table 35: Tightening torque (72041)
1. Position the diffuser (79000) in the compressor casing (72000).
2. Rotate the diffuser until its bore is aligned with the bore in the compressor casing.
3. Fit and tighten screw (72041).