10
INSTRUCTION HANDBOOK
6.6 PHASE 6 – CIRCUIT BREAKER COVER AND TRIPPING SHAFT
Tools
Actions to be performed
Cross screwdriver
Torx key
Cutter
No. 6
Pliers
Flat screwdriver
13
By means of the cross screwdriver unscrew the 4
screws located in correspondence of the removed
operating mechanism fixing the circuit breaker
cover to the circuit breaker base.
17
Manually remove the tripping shaft from the
circuit breaker cover.
18
By means of the pliers remove the lever located in the
bottom part of the circuit breaker cover.
15
By means of the cutter start removing the label
located on the left side of the circuit breaker and
manually complete the operation.
14
By means of the torx key unscrew the 2 screws
located on the circuit breaker sides fixing the
circuit breaker cover to the circuit breaker base.*
16
Manually lift the circuit breaker cover.
*The 2 screws are present on circuit breakers with S and H breaking capacities only.
Summary of Contents for Tmax XT XT1
Page 1: ... INSTRUCTION HANDBOOK 1SDH002291A1001 ECN000285442 Tmax XT XT1 Disassembly instructions ...
Page 2: ......
Page 15: ......
