manualshive.com logo in svg

ABB TB404, Operating Instruction, Page: 11 / 40

Share
Download
ABB TB404 Operating Instruction Download Page 11

INTRODUCTION

HOW TO USE THIS INSTRUCTION
1 - 2

 

Introduction

Provides a product overview, a description of the sensor and its applications
and a description of this instruction and how to use it. This section also has a
list of reference documents on related equipment and subjects, the product
identification (nomenclature) and a comprehensive list of specifications and
accessories.

Installation

Contains unpacking and inspection instructions, and location considerations.
Included under location considerations are installation guidelines to follow
for proper installation of the sensor. Following this information is a table that
guides installation personnel to the appropriate installation procedures.

Repair and Replacement

Contains procedures for removing the sensor from the hot tap hardware
assemblies and cleaning the sensor.

Support Services

Contains spare and replacement parts information as well as information on
customer support.

HOW TO USE THIS INSTRUCTION

Read this entire instruction in sequence before attempting to install, maintain
or repair the sensor. After gaining a complete understanding of this instruc-
tion and the sensor, it can be used as a reference.

The installation section of this instruction has been prepared in procedure
format. Table 

2-1

 directs installation personnel to the appropriate procedure.

By treating each task as a separate entity, the procedures provide an easy
method for finding the information needed to perform each task. The proce-
dures can be removed and placed into separate folders or notebooks and car-
ried to the job site.

REFERENCE DOCUMENTS

Table 

1-1

 lists the ABB documents to be used in conjunction with this

instruction.

Table 1-1.  Reference Documents

Number

Document

C-E67-23-1

Conductivity/Resistivity Sensors for Process Monitoring

D-NCC-TB404

Type TB404 Toroidal Conductivity Sensor Specification

I-E67-82-4A

TB82TC Toroidal Conductivity Transmitter

I-E67-84-4

TB84TC Toroidal Conductivity Analyzer

D-NCA-TB82

TB82 Data Sheet

D-NCA-TB84TC

TB84TC Data Sheet

D-NCC-TB4043

Type TB4043 Toroidal Conductivity Sensor Specification

Summary of Contents for TB404









































Reviews:

No comments