41/78 SUREWAVE SFC USER MANUAL
By default, the input circuit breaker and termination enclosure are located on the left side (front
view), and the output circuit breaker and termination enclosure are located on the right side of
the plinth. These can be specified as reverse at the time of ordering.
Additionally, for models fitted with termination enclosure, the power cable routing could be
from the top or the bottom of the termination enclosure. Single enclosure solution only provides
bottom routing.
Figure 9-2: Multiple enclosures power cables connection
––
I/O interfaces
Multiple digital I/O and analogue I/O are available on the MC (main controller) for monitoring
and control of the system.
The ethernet connection for remote webpage and MODBUS is provided for in the MC gear tray.
This is routed to the main controller via the graphic display module (GDM), which provided the
cyber security.
1
2
3
4
5
Figure 9-3: Universal controller – User interfaces
