Section 4 Engineering
Overview of the engineering
40
1MRS755221
After you have added the required objects to the SPA OPC Server Configuration Tool,
you need to configure them, see
SPA Signals
An OPC item tag/node representing a signal, usually a command or
an indication. There are seven types of signals, see
on page 44. Signals describe the actual information
that a device or module provides. The signals and their icons are the
following:
Double Indication
A signal consisting of two bits (double binary). Bit values are
presented as an integer value 00=0, 01=1, 10=2 and 11=3.
Single Indication
A signal presenting one bit information, values: 0 or 1.
Analog Input
A signal presenting floating point value information.
Digital Input
A signal presenting integer value information.
Command
Signal for controlling binary outputs.
Pulse Counter
A signal presenting long integer value information.
Analog Setpoint
A signal for controlling analog setpoints/outputs.