ABB ScreenMaster RVG200 Operating Instructions Manual Download Page 36

Page: 36 / 190

ScreenMaster RVG200

Paperless recorder

4 Operation

OI/RVG200-EN

4.6 Log views

4.6.1 Alarm event log

Key to Fig. 4.9:

Tag of the alarm's source.

Alarm becomes active (active transition).

Real-time alarm icon.

Alarm becomes inactive (inactive transition).

Operator message.

Touch the screen here to view the next page of data.

Newest data.

Alarm acknowledged.

Oldest data – touch the screen here to view the previous page of data.

Global alarm icon.

Note.



The Alarm Event log view provides an historical log of all alarm events in the sequence in which
they occurred.



When the number of entries in the Alarm Event log has reached 500, the oldest data is overwritten
by the newest. Entries are renumbered so that the number of the oldest entry is always 00.

Fig. 4.9 Alarm event log

Summary of Contents for ScreenMaster RVG200































































































































































































Search results

Summary of Contents for ScreenMaster RVG200

Reviews:

Related manuals for ScreenMaster RVG200

Brands by name

Popular brands

ABB ScreenMaster RVG200, Operating Instructions Manual

Search results

Summary of Contents for ScreenMaster RVG200

Reviews:

Related manuals for ScreenMaster RVG200

Brands by name

Popular brands