2
IN/RandC/006-EN Rev. A
| ScreenMaster RVG200 | Paperless recorder | Battery replacement
4 Replacing the battery
1.
Isolate the recorder from the power supply.
Referring to Fig. 4.1:
2.
Remove the tamper evident seal
A
if fitted.
3.
Using a medium flat-bladed screwdriver, unscrew jacking
screw
B
.
4.
Remove chassis
C
from case
D
.
Referring to Fig. 4.2:
5.
Locate the mounted battery
E
on the underside of the
case.
Referring to Fig. 4.3:
6.
Remove the battery from the battery-mount
F
and fit a
new battery.
Referring to Fig. 4.1:
7.
Insert chassis
C
into case
D
.
8.
Using a medium flat-bladed screwdriver to secure jacking
screw
B
to case
D
.
9.
Fit new tamper evident seal
A
(if required).
10. Restore power to the recorder and proceed to Section 5,
page 3.
CAUTION – Property damage
The recorder is vulnerable to electrostatic damage.
Wear an anti-static strap or place the instrument on
an anti-static workbench.
Fig. 4.1 Removing the recorder from its case
A
B
C
D
Fig. 4.2 Locating the battery
Important note
Dispose of the old battery as detailed in the
Operating instructions (
OIRVG200-EN).
Fig. 4.3 Replacing the battery
E
F
