1SDH002031A1002 ECN000092998 Rev. B
SACE Tmax XT2
– XT4 | 12
Additional
functions
Ekip Touch can be equipped with additional software configurations that perform different
functions:
Power Controller
Load Shedding
Interface Protections (IPS)
Synchro reclosing
Embedded ATS
For details see the
Technical Catalog
(see page 4) or the summary documentation for each
function (see page 12).
Support software
and
documentation
Various software and documentation are available
– most of them for free – to facilitate, optimize,
and extend Ekip Touch functions and configurations in your system:
NOTE: some documents referred to in the following table refer to the SACE Emax 2
device, but can also be used with SACE Tmax XT2 - XT4
Name
Code
Description
--
ABB software to interface with Ekip Touch and other low-
voltage devices
Ekip Connect
Mobile
--
ABB app to interface with Ekip Touch via Bluetooth using a
smartphone/tablet
1SDH001276R0001
ABB software that supervises the communication network,
analyzes electrical values and monitors system conditions.
NOTE: clicking on the link will start the download of
a software package that requires about 1.3 GB of
space.
--
ABB software suite that includes the following tools:
DOC
, to design single-circuit diagrams of low- and
medium-voltage electrical systems, choose the switching
and protection devices, and verify and coordinate the
protections.
CAT
, for technical/commercial estimates of ABB products.
Curves
, to draw, calibrate, and print the tripping curves of
protection devices.
OTC
, to verify the thermal behavior of panels and to size
the fans and air conditioners used therein.
UniSec
, to configure medium-voltage panels.
Software that offers graphic block libraries for ABB panel
products for use in the latest versions of AutoCAD, AutoCAD
LT, and IntelliCAD.
NOTE: clicking on the link will start the download of
a software package that requires about 190 MB of
space.
1SDC200031L0901
Introduction to the
Ekip Link
panel control system
1SDC007116G0201
White paper on adaptive protections
1SDC007410G0901
White Paper on the
Power Controller
function
1SDC007117G0201
White Paper on the Interface Protection System (IPS) and
Interface Device (DDI)
1SDC007119G0201
White Paper on
Load Shedding
- Load shedding priority
1SDC007118G0201
White paper on
Synchro reclosing
synchronization solutions
Integrated ATS
1SDC007115G0201
White Paper on
ATS
systems for applications that require
continuity of service
1SDC010002D0902
General overview of electrical systems
Summary of Contents for SACE Tmax XT2
