ABB | SACE Emax 2
48 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Ekip Touch protection trip unit | 6 - Menu
Advanced menus
The following table shows the submenus and the protections associated to the menu
Advanced
, and the
relevant Ekip Touch trip units.
IMPORTANT:
• Selecting a protection opens the list of the parameters that can be set for the
selected protection.
• With Hi-Touch and G Hi-Touch trip units, and the Dual Set function enabled (see
the Settings menu), the protections can be set according to two configurations (Set
A and Set B), from which the default configuration can be selected.
Advanced
Trip units
•
Set A
(1)
•
Set B
(1)
S(V) Protection
-
-
G-Touch
G Hi-Touch
S2(V) Protection
-
-
-
MCR Protection
Touch
Hi-Touch
G-Touch
D Protection
-
-
IU Protection
Touch
G-Touch
Rc Protection
(2)
UV Protection
Touch
(3)
UV2 Protection
-
-
OV Protection
Touch
(3)
G-Touch
OV2 Protection
-
-
RV Protection
-
-
G-Touch
VU Protection
Touch
(3)
Hi-Touch
UF Protection
Touch
(3)
UF2 Protection
-
-
OF Protection
Touch
(3)
G-Touch
OF2 Protection
-
-
ROCOF Protection
-
-
-
RP Protection
Touch
(3)
Hi-Touch
G-Touch
RQ ProtectioN
-
-
OP Protection
-
-
OQ Protection
-
-
UP Protection
-
-
Synchrocheck
(4)
Touch
(3)
Hi-Touch
Alarms
Touch
(3)
Current thresholds
Touch
•
Functions
External Trip
(5)
Trip RESET
(6)
Switch On SET B
(7)
(1)
Submenus available with Hi-Touch and G Hi-Touch trip units, and the Dual Set function enabled (see the
Settings menu).
(2)
Protection available with Rating Plug Rc and Ekip Measuring Pro modules, and toroid Rc (see the menu
Settings, Circuit Breaker, Ground protection), and alternative to the Gext protection (see the Protections menu).
(3)
Protection available with Ekip Measuring Pro module.
(4)
Protection available with the Ekip Synchrocheck module.
(5)
It opens a list of the parameters that can be set for programming the opening of the circuit-breaker.
(6)
It opens a list of the parameters that can be set for programming the reset of the tripping signal.
(7)
It opens a list of the parameters that can be set for programming the switching of the protection configuration
from A to B.
Summary of Contents for SACE Emax E1.2
Page 2: ...ABB SACE Emax 2 2 2017 ABB 1SDH001330R0002 ECN000058721 Rev A ...
Page 8: ...VI 2017 ABB SACE Emax 2 1SDH001330R0002 ECN000058721 Rev A ...
Page 9: ...ABB SACE Emax 2 3 2017 ABB 1SDH001330R0002 ECN000058721 Rev A ...
Page 310: ...ABB SACE Emax 2 304 2017 ABB 1SDH001330R0002 ECN000058721 Rev A Service 1 Power Care ...