ABB | SACE Emax 2
Ekip Touch protection release | 6 - Menu
65 | © 2013
ABB |
1SDH001000R0002 - L7804
6 - Menu
Introduction
This paragraph illustrates:
• The
Menu
.
• The structure of the menus.
• How to navigate among the menus
The
Menu
is the menu access page.
The menus are the level 3 pages that can be displayed on display (see the chapter “1 -
Layout of the interface" and the paragraph "Structure of the pages" on page 57”), and they are
composed of lists of:
• Submenus.
• Parameters that can be set.
• Commands that can be performed.
Selecting a menu item can:
• Open a submenu.
• Open the page
Modify Parameter
to set a parameter.
• Display scrollable lists of information (e.g. on circuit-breaker, Mainboard, release, connected
modules), measurements in real time, events recorded.
• Open a graphical page (secondary).
• Perform a command (e.g. reset or test).
Components of the page
The page appears as follows:
A
B
C
D
E
F
G
Protections
Advanced
Measurements
Settings
Test
About
Figure 72
The following table provides a description of the various areas of the page:
Pos.
Function
A
Open the
Protections
menu.
B
Open the
Advanced Protections
menu.
C
Open the
Measurements
menu.
D
Open the
Settings
menu.
E
Open the
Test
menu.
F
Open the
Information
menu.
G
In the presence of messages, open the
Alarm List
page.