ABB | SACE Emax 2
Introduction to Ekip protection trip units | 1 - Presentation
31 | © 2017
ABB |
1SDH000999R0002 - ECN000058721 - Rev. B
Introduction to Ekip protection trip units
1 - Presentation
Families and functionality
SACE Emax 2 can be configured with five different types of protection trip unit, distinguished by type of
interface and functionality. One trip unit has a dip-switch interface (Ekip Dip) while the others are equipped
with a touchscreen display (Ekip Touch).
Ekip Dip
Ekip Touch
Ekip Hi-Touch
Ekip G Touch
Ekip G Hi-Touch
Ekip Measuring Pro
Ekip Measuring
Figure 66
All trip units have protection and measuring functions that refer to the primary currents of the installation and
are available in the following versions:
•
Ekip DIP:
LI, LSI, LSIG
•
Ekip Touch:
LI, LSI, LSIG
•
Ekip Hi-Touch:
LSI, LSIG
•
Ekip G Touch:
LSIG
•
Ekip G Hi-Touch:
LSIG
The Ekip Touch trip unit can be equipped with the Ekip Measuring module to extend the measurement
functions, or the protection and measurement functions (with the Ekip Measuring Pro module), to voltage,
power and energy.
NOTE:
the Ekip Hi-Touch, Ekip G Touch and Ekip G Hi-Touch trip units have the Ekip Measuring
Pro module mounted as standard.
The corresponding LCD model (Ekip LCD, Ekip Hi-LCD, Ekip G LCD, Ekip G Hi-LCD) is available for all Ekip
Touch versions if the installation must operate in particularly aggressive environmental conditions.
Ekip Dip is described starting from page 34
Information about the Ekip Touch is available on the website http://www.abb.com/abblibrary/DownloadCenter/,
especially in manual
Full details about all the trip units in the Emax 2 family are given in the engineering manual
available on the website http://www.abb.com/abblibrary/DownloadCenter/
