manualshive.com logo in svg

ABB SACE Emax 2 E1.2, Instruction Handbook Manual, Page: 24 / 48

Share
Download
ABB SACE Emax 2 E1.2 Instruction Handbook Manual Download Page 24

24

INSTRUCTION HANDBOOK

96

 

By means of the cutter start removing the 2 labels 

located on the trip unit back cover and by means 

of the pliers complete the operation.

•  2 + 2 + 4 + 2 + 1 + 4 + 4 screws (Metal)
•  1 cables protection (Plastic) SEPARATE TREATMENT 

(Thermoplastics containing brominated flame retardants)

•  1 plug (Plastic)
•  1 plug label (Adhesive paper)
•  1 rating plug printed circuit board (Plastic, Metal and Electronic 

components) SEPARATE TREATMENT (Printed circuit board)

•  1 rating plug case (Plastic) SEPARATE TREATMENT 

(Thermoplastics containing brominated flame retardants)

•  1 rating plug label (Adhesive paper)
•  1 Ekip measuring blind plug (Plastic)
•  1 Ekip measuring blind plug label (Adhesive paper)
•  1 Ekip measuring blind case (Plastic)
•  1 Ekip measuring blind printed circuit board (Plastic, Metal and 

Electronic components) SEPARATE TREATMENT (Printed circuit 

board)

•  1 Ekip measuring blind cover (Plastic)
•  1 HMI box (Plastic)
•  1 trip unit front label (Adhesive paper)
•  1 battery cover (Plastic) SEPARATE TREATMENT (Thermoplastics 

containing brominated flame retardants)

•  1 battery (Battery) SEPARATE TREATMENT (Battery)
•  1 HMI LCD cover (Plastic)
•  1 “i Test” pushbutton (Rubber)
•  1 battery gasket (Rubber)
•  1 display support (Plastic) 
•  1 display printed circuit board (Plastic, Metal and Electronic 

components) SEPARATE TREATMENT (Printed circuit board)

•  1 display (Liquid crystal dislay) SEPARATE TREATMENT (Liquid 

crystal dislay) 

•  1 gasket (Silicon)
•  1 backplane (Plastic, Metal and Electronic components) 

SEPARATE TREATMENT (Printed circuit board)

•  1 blind label (Adhesive paper)
•  1 trip unit case (Plastic) SEPARATE TREATMENT (Thermoplastics 

containing brominated flame retardants)

•  1 trip unit back cover (Plastic) SEPARATE TREATMENT 

(Thermoplastics containing brominated flame retardants)

•  1 trip unit printed circuit board (Plastic, Metal and Electronic 

components) SEPARATE TREATMENT (Printed circuit board)

•  1 measuring module connector (Plastic and Metal) SEPARATE 

TREATMENT (Thermoplastics containing brominated flame 

retardants)

•  6 labels (Adhesive paper)

Disassembled parts

Summary of Contents for SACE Emax 2 E1.2

















































Reviews:

No comments