ABB RPC S-series, Applications Manual

Page: 13 / 30

2.3 Active arc welding system
General
The selection of the AW system determines which equipment is active when manual
operations (Gas On, Manual Wire feed, Editing jobs) are executed.
For information on how to change active arc welding system, see Selecting arc
welding system on page 23 .
Active power source information
The name of the active arc welding system is indicated in the upper right-hand
corner. The Integrated Power Source supports up to four robots and each robot
can have one RPC S-Series power source.
en1000001319
3HAC050970-001 Revision: - 13
© Copyright 2014 ABB. All rights reserved.
2 Integrated Power Source application
2.3 Active arc welding system