ABB RHDE8000, Operating Instructions Manual

Page: 33 / 50

Technical data
42/68-168-EN RHDE8000 ... 16000 (Contrac) 33
Pos: 21.1 /Überschriften/1/S - U/Technische Daten @ 0\mod_1132904574837_3101.doc @ 3169
9 Technical data
Pos: 21.2 /Überschriften/1.1/1-spaltig/A - C/Allgemeine Daten @ 0\mod_1140622753015_3101.doc @ 3177
9.1 General information
Pos: 21.3 /Technische Daten / Datenblatt/Aktorik/Antriebe/Schwenkantriebe, Ex/Allgemein/Allgemeine Daten RHDE8000...16000 @ 14\mod_1194444410359_3101.doc @ 136891
RHDE8000 ... 16000 (Contrac)
Operating mode S9; stallproof acc. to IEC 60034-1 / EN 60034-1
Protection Class IP 66; explosion proof
Moisture ≤
95% average; condensation not permitted
Ambient temperature -25 … 60 °C (-13 … 140 °F)
-30 … 40 °C (-22 … 104 °F)
(reduced positioning speed at rated load and below -10 °C (14 °F))
Transport and storage temperature -30 ... 60 °C (-22 … 140 °F)
Installation position for RHDE8000 IMB3, IMB6, IMB7, IMV6; preferably IMB3 acc. to IEC 60034-7 / EN 60034-7
Installation position for RHDE16000 IMB3 acc. to IEC 60034-7 / EN 60034-7
Coating 2-layer component epoxy (RAL 9005, black)
Anti condensation heater Motor winding Directly from the electronic unit.
Signal space:
Separate heating resistor; separate power supply or power feed from
Contrac electronic unit .
Electrical connection terminals in EEx e connection chamber; separately for motor and signals
connecting cable electronics – actuator optional (see ordering information of electronics)
Power supply for motor and sensors Only via Contrac electronic unit (refer to the data sheet for the electronic unit)
Pos: 21.4 /Überschriften/1.1/1-spaltig/S - U/Technische Daten RHDE8000 @ 11\mod_1185794095609_3101.doc @ 112010
9.2 Technical data RHDE8000
Pos: 21.5 /Technische Daten / Datenblatt/Aktorik/Antriebe/Schwenkantriebe, Ex/El. Schwenkantrieb RHDE 8000 (Contrac)/Regelantrieb Ex @ 6\mod_1169210492437_3101.doc @ 61873
Model RHDE8000-15 RHDE8000-80
Rated torque 8000 Nm (5900 lbf-ft)
(adjustable to 0.5, 0.75 or 1x rated torque)
Starting torque 1.2 x rated torque (break-away torque in end positions for short time 2 x rated torque)
Rated time for 90° 15 … 900 s 80 … 900 s
Operating speed, adjustable 6.0 … 0.1 °/s 1,12 … 0,1 °/s
Operating angle Typically 90° (min. 35°, max. 140°). See instructions for limited operating angle if actuator is equipped with
lever and limit stop.
Weight approx. 710 kg (1565 lb) approx. 725 kg (1598 lb)
Related electronics
For field installation:
For rack installation:
Model EBN861
1)
Model EBS862
2)
Model EBN853
3)
Model EBS852
4)
Thermal motor
Monitoring With motor temperature monitoring equipment SD241B
5)
or similarly certified tripping unit for PTC
thermistor detectors
Motor type BD 112 M 4B BD 90 L2-4B
Sensors Position and temperature sensor always available.
1)
Data sheet EBN861:10/68-8.22
2)
Data sheet EBS862:10/68-8.25
5)
Data sheet SD241B:10/68-8.30
3)
Data sheet EBN853: 10/68-8 27
4)
Data sheet EBS852: 10/68-8 24
Pos: 21.6 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830