manualshive.com logo in svg

ABB RHDE250, Operating Instructions Manual

Share
Download
ABB RHDE250 Operating Instructions Manual Download Page 36

Maintenance 

 

36 

RHDE250 ... 4000 (Contrac) 42/68-167-EN 

 

Pos: 17.6 /Überschriften/1.1/1-spaltig/A - F/Bremseneinstellung @ 10\mod_1181642242218_3101.doc @ 103863 

 

7.2 

Brake adjustment 

 

Pos: 17.7 /Wartung / Reparatur/Aktorik/Antriebe/Allgemein/Bremseneinstellung @ 10\mod_1181641915859_3101.doc @ 103794 

 

 

Warning - risk of injury! 

Note that the actuator position may be changed accidentally by the  repelling power of the 
valve when the brake is released! 

 
Since the brake is permanently released in AUT mode it is not exposed to mechanical wear. 
Any readjustment is not necessary. Enables users to test the configuration software of the 
brake. 

Pos: 17.8 /Überschriften/1.1/1-spaltig/M - R/Ölwechsel @ 10\mod_1181652527843_3101.doc @ 104243 

 

7.3 

Oil change 

 

Pos: 17.9 /Wartung / Reparatur/Aktorik/Antriebe/Elektr. Schwenkantriebe/Allgemein/Ölwechsel @ 10\mod_1181632020265_3101.doc @ 103369 

 

 

Important 

Oils for different temperature ranges may not mixed. Dispose of old oil according to local 
regulations. Make sure that the oil does not enter the water cycle. 

 

Proceed as follows to drain or change the oil: 

1.

 

Provide a container capable of holding the expected oil quantity acc. to chapter Filling 
capacity. 

2.

 

Open and remove the ventilation plug, see Fig. 3. 

3.

 

Unscrew the lowermost inspection plug and drain the oil. 

4.

 

Make sure all the oil is out of the actuator. 

5.

 

Screw in and tighten the oil drain plug. 

6.

 

Fill the container with the proper volume of oil and tighten the venting plug. 

 

Pos: 17.10 /Wartung / Reparatur/Aktorik/Antriebe/Elektr. Schwenkantriebe/Allgemein/Schmiermittel @ 10\mod_1181719095156_3101.doc @ 105134 

 

Ambient temperature 

Oil types 

(default oil filled with delivery) 

-25 ... 60 °C (-13 ... 140 °F) 

Mobil SHC 629 

-30 ... 40 °C (-22 ... 104 °F) 

Mobil SHC 626 

 

Pos: 17.11 /=======  Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 

Summary of Contents for RHDE250

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands