Safety
10
RHD8000 ... 16000 42/68-166-EN
Pos: 4.28 /Überschriften/1.1/1-spaltig/S - U/Sicherheitshinweise zum Betrieb @ 0\mod_1140166424437_3101.doc @ 3205
1.13 Operating safety information
Pos: 4.29 /Sicherheit/Aktorik/Elektr. Schwenkantriebe/Allgemein/Sicherheitshinweise zum Betrieb RHD @ 16\mod_1197272272796_3101.doc @ 144931
Warning - risk of injury!
Note that the actuator position may be changed accidentally by the repelling power of the
valve when the brake is released!
Before switching on, ensure that the specified environmental conditions in the “Technical
Specifications” chapter or data sheet are complied with and that the power supply voltage
corresponds with the power electronic unit.
When there is a chance that safe operation is no longer possible, put the device out of operation
and secure against unintended operation.
When mounting the actuator in areas which may be accessed by unauthorized persons, take
the required protective measures.
Switch off the power supply to the motor prior for manual operation.
Pos: 4.30 /Überschriften/1.1/1-spaltig/S - U/Sicherheitshinweise zur Wartung @ 10\mod_1181811822343_3101.doc @ 106052
1.14 Maintenance safety information
Pos: 4.31 /Sicherheit/Aktorik/Elektr. Schwenkantriebe/Allgemein/Sicherheitshinweise zur Wartung @ 10\mod_1181812046750_3101.doc @ 106075
• When changing the oil of the actuator, thoroughly remove any oil that may have run down on
the floor during the procedure to avoid accidents.
• Dispose of the waste oil in compliance with the respective local regulations. Make sure that
no oil reaches the water cycle.
• Switch off the supply voltage for the power electronic unit and separate anti-condensation
heater (option) when working on the actuator or related subassemblies and take precautions
to prevent unintentional switch-on.
• Make sure that any oil leaking from the device cannot come into contact with hot parts
Pos: 5 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
