ABB RELION RET670, Applications Manual

Page: 860 / 1016

Name of input Type Default Description Value when
activated
Value when
deactivated
IN4 BOOLEAN 0 Input 4 8 0
IN5 BOOLEAN 0 Input 5 16 0
IN6 BOOLEAN 0 Input 6 32 0
IN7 BOOLEAN 0 Input 7 64 0
IN8 BOOLEAN 0 Input 8 128 0
IN9 BOOLEAN 0 Input 9 256 0
IN10 BOOLEAN 0 Input 10 512 0
IN11 BOOLEAN 0 Input 11 1024 0
IN12 BOOLEAN 0 Input 12 2048 0
IN13 BOOLEAN 0 Input 13 4096 0
IN14 BOOLEAN 0 Input 14 8192 0
IN15 BOOLEAN 0 Input 15 16384 0
IN16 BOOLEAN 0 Input 16 32768 0
The sum of the numbers in column “Value when activated” when all INx (where
1≤x≤16) are active that is=1; is 65535. 65535 is the highest boolean value that can be
converted to an integer by the BTIGAPC function block.
17.10 Integer to Boolean 16 conversion IB16
SEMOD158367-1 v2
17.10.1 Identification
SEMOD167941-2 v2
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Integer to boolean 16 conversion IB16 - -
17.10.2 Application
SEMOD158499-5 v4
Integer to boolean 16 conversion function (IB16) is used to transform an integer into a
set of 16 binary (logical) signals. It can be used – for example, to connect integer
output signals from one function to binary (logical) inputs to another function. IB16
function does not have a logical node mapping.
The Boolean 16 to integer conversion function (IB16) will transfer a combination of up
to 16 binary inputs INx where 1≤x≤16 to an integer. Each INx represents a value
Section 17
1MRK 504 163-UUS A
Logic
854 Transformer protection RET670 2.2 ANSI
Application manual