ABB RELION REF610, Operator'S Manual

Page: 14 / 50

14
1MRS 755539 Feeder Protection Relay
Operator’s Manual - ANSI Version
REF 610
3.1.7. SPA password (from CAP 501 password to download)
The password for SPA bus communication is required for altering parameter values
via the SPA bus. The default password is 001. You can change the SPA password
either via the HMI or the SPA bus by first entering the currently valid password into
parameter V160 and then entering the new password into parameter V161.
Change the SPA password as follows:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select
CONFIGURATION\COMMUNICATION\SPA
SETTINGS\PASSWORD SPA and press .
3. Press to enter the setting mode and give the current HMI password if
required. If the default password 001 is still valid, no password will be required.
4. The first digit of the password to be edited will start to flash. Set the digit using
and .
5. Activate the next digit to be set by pressing or .
6. To store the new SPA password and return the display to the view mode, press
. The display will confirm the storage by once flashing “ --- ” on the display.
Alternatively, to exit the setting mode without storing the SPA password change,
press
once before confirming and the display will be returned to the view
mode.
7. Press to return the display to the idle mode.
Fig. 3.1.7.-1 Changing the SPA password
3.1.8. How to select language
REF 610 allows you to choose among several different languages. The default
language is English. For the selection of languages, see Fig. 3.1.8.-1.
Change the display language as follows:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select
CONFIGURATION\LANGUAGE
and press to
enter the currently valid language.
Main Menu Group Menu Parameter Menu
MEASUREMENTS
RECORDED DATA
OPERATION
SETTINGS
CONFIGURATION
INFO
CONFIGURATION
FUNCTION TEST/DI
COMMUNICATION
LANGUAGE
MEMORY SETTINGS
FREQUENCY
PASSWORD HMI
TIME
TRIP CIRCUIT SUP
CONFIGURATION
PASSWORD SPA :XXX
Scroll for the digit
Set the digit
Confirm
Cancel
spaPWref610_B
CONFIGURATION
REAR CONNECTION
REAR PROTOCAL
REAR COM. MODULE
SPA SETTINGS
IEC103 SETTINGS
MODBUS SETTINGS
UNIT ADDRESS
COUNTER
LINE-IDLE STATE
CONNECTION TYPE