IEC08000361.vsd
IEC08000361 V1 EN
Figure 64:
CMT: Move buttons
4. Click the drop down list
Signal Type:
to select the other signal types for this
channel.
5. Repeat to move signals for all signal types and save the selection.
Content changes in the DNP3 container are marked with a star at
the end of the name, see
. The star indicates that changes
in the container have to be saved before leaving CMT.
IEC08000339.vsd
IEC08000339 V1 EN
Figure 65:
CMT: Marker to indicate changes in the container
9.3
Setting DNP3 signal parameters
Two parameters per signal can be set for all signal types:
•
The index of the signal
•
The class configuration
Procedure to set the index of the signal:
1. Click the two inner arrows to sort signals to another index sequence, or select
Set Index ...
from the context menu to move one or a set of signals to another
.
1MRK511240-UEN B
Section 9
DNP3 communication engineering
670 series
87
Engineering Manual
