ABB RELION 650 SERIES, Technical Manual

Page: 523 / 942

Name of OUTx Type Description Value when
activated
Value when
deactivated
OUT11 BOOLEAN Output 11 1024 0
OUT12 BOOLEAN Output 12 2048 0
OUT13 BOOLEAN Output 13 4096 0
OUT14 BOOLEAN Output 14 8192 0
OUT15 BOOLEAN Output 15 16384 0
OUT16 BOOLEAN Output 16 32768 0
The sum of the numbers in column “Value when activated” when all OUTx
(1≤x≤16) are active equals 65535. This is the highest integer that can be converted
to boolean by the ITBGAPC function block.
The operator position input (PSTO) determines the operator place. The integer
number that is communicated to the ITBGAPC can only be written to the block
while the PSTO is in position “Remote”. If PSTO is in position ”Off” or ”Local”,
then no changes are applied to the outputs.
13.12.7 Technical data
GUID-A339BBA3-8FD0-429D-BB49-809EAC4D53B0 v1
Table 351: Number of ITBGAPC instances
Function Quantity with cycle time
3 ms 8 ms 100 ms
ITBGAPC 4 4 8
13.13 Elapsed time integrator with limit transgression and
overflow supervision TEIGAPC
13.13.1 Identification
GUID-1913E066-37D1-4689-9178-5B3C8B029815 v3
Function Description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2 device
number
Elapsed time integrator TEIGAPC - -
13.13.2 Functionality
GUID-390D7433-0C1C-48B4-9A90-71AA148C3C35 v3
Elapsed Time Integrator (TEIGAPC) function is a function that accumulates the
elapsed time when a given binary signal has been high, see also Figure
270 .
1MRK 506 382-UEN A
Section 13
Logic
Line distance protection REL650 2.2 IEC 517
Technical manual