ABB Relion 650 series ANSI, Manual

Page: 104 / 242

7.5.8.2 Current reversal and WEI logic for distance protection 3-phase
ZCRWPSCH (85)
LN type LN prefix LN class Function block name
ZCRWPSCH (revision 2) ZCRW PSCH ZCRWPSCH (85)
Table 41: ZCRWPSCH (85) Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Op a_dACT general ST T TRWEI Mon Trip of WEI logic
phsA ST T - Mon Trip of WEI logic in phase A
phsB ST T - Mon Trip of WEI logic in phase B
phsC ST T - Mon Trip of WEI logic in phase C
q ST T TRWEI Mon Trip of WEI logic
t ST T TRWEI Mon Trip of WEI logic
Mod a_dINC Oper.ctlVal CO - - Cmd Mode parameter
Oper.origin.orCat CO - - Cmd Mode parameter
Oper.origin.orIdent CO - - Cmd Mode parameter
Oper.ctlNum CO - - Cmd Mode parameter
Oper.T CO - - Cmd Mode parameter
Oper.Test CO - - Cmd Mode parameter
Oper.Check CO - - Cmd Mode parameter
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Mode status parameter for 61850
t ST - - Mon Mode status parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Behaviour parameter for 61850
t ST - Beh Mon Behaviour parameter for 61850
ProRx a_dSPS stVal ST T - Mon POR Carrier signal received from
remote end
q ST T - Mon POR Carrier signal received from
remote end
t ST T - Mon POR Carrier signal received from
remote end
ProTx a_dSPS stVal ST T ECHO Mon A signal that indicates channel start
(CS) by WEI logic
q ST T ECHO Mon A signal that indicates channel start
(CS) by WEI logic
Table continues on next page
Section 7
1MRK 511 281-UUS A
Logical node data model
98 650 series ANSI
Communication protocol manual